Echo Power Edger PE-265 Operator's Manual

Power edgeroPerator's Manual 15startIng warm engIneThe starting procedure is the same as Cold Start except DO NOT closethe choke, and do not depress throttle trigger to wide open position.warningThe attachment should not move at idle, otherwise serious personalinjury may result.NOTEIf attachment moves, readjust carburetor according to “CarburetorAdjustment” instructions in this manual or see your ECHO Dealer.1. Stop SwitchMove stop switch (A) away from the STOP position2. Purge BulbPump purge bulb (C) until fuel will be visible and flows freely inthe clear fuel tank return line. Pump bulb an additional 4 or 5times.3. Recoil StarterLay the unit on a flat area and keep movable attachment parts clearof all obstacles. Rapidly pull recoil starter handle/rope (D) untilengine fires.NOTEIf engine does not start after 5 pulls, use Cold Start Procedure.stoppIng engIne1. ThrottleRelease throttle and allow engine to return to idle before shuttingoff engine.2. Stop SwitchMove stop switch (A) to STOP position.warningIf engine does not stop when stop switch is moved to STOP posi-tion, close choke - COLD START position - to stall engine. Haveyour ECHO dealer repair stop switch before using edger again.aCaDD