Power edgeroPerator's Manual 3safetymanual safety symbols and Important InformatIonThroughout this manual and on the product itself, you will find safety alerts and helpful, informational messages pre-ceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean toInternatIonal symbolsHotSurfaceSymboldescription/appli-cationSymbol form/shapeSymboldescription/ap-plicationSymbol form/shaperead and understandOperator's Manual.wear eyes, ears andhead protectionFuel and oil mixtureSafety/alertavoid all powerlines. This unit is notinsulated againstelectrical current.wear handprotection. Usetwo handed.DO nOT smokenear fuel.DO nOT allowflames or sparksnear fuel.Keep bystanders away15 m (50 ft.)Symboldescription/appli-cationSymbol form/shapeSymboldescription/ap-plicationSymbol form/shapeCarburetor adjust-ment- idle speedCarburetor adjust-ment- High speedmixtureEmergency stopCarburetor adjust-ment- Low speedmixturewear slip resis-tant foot wear.ignitionOn/OFFPrimerbulbKeep feet awayfrom bladeThrownobjectsDirection ofbladeChoke Control"Cold Start"Position(Choke Closed)Choke Control"run"Position(Choke Open)warningThe safety alert symbol accompanied by the word“WARNING” calls attention to an act or condi-tion which CAN lead to serious personal injury ordeath if not avoided.CIRCLE AND SLASh SyMbOLThis symbol means the specific actionshown is prohibited. Ignoring these prohi-bitions can result in serious or fatal injury.CaUTiOnThe safety alert symbol accompanied by the word“CAUTION” calls attention to an act or conditionwhich may lead to minor or moderate personalinjury if not avoided.NOTEThis enclosed message provides tips for use, care andmaintenance of the unit.IMPORTANTThe enclosed message provides information neces-sary for the protection of the unit.DangErThe safety alert symbol accompanied by the word“DANGER” calls attention to an act or conditionwhich WILL lead to serious personal injury ordeath if not avoided.rotatingCutting attach-ment