Echo SMR-2110 - 01-99 Operator's Manual
                                    | |
Contents
|
GRASS TRIMMER /BRUSH CUTTEROPERATOR ' S MANUAL 29ABBCLUBRICATIONLevel 1.Tools required: 8 mm Open End Wrench, Cross Head Screwdriver,Clean ragParts Required: ECHO® LUBETM 8 oz. (P/N 91014) or Lithium BaseGrease.Gear Housing1. Clean all loose debris from gear box.2. Remove plug (A) and check level of grease.3. Add grease if necessary, DO NOT over fill.Drive Shaft1. Loosen two (2) screws (B) and remove center locating screw (C).Pull gear box and shield from drive shaft housing.2. Pull flexible cable from the drive shaft housing, wipe clean andrecoat with a thin coating of [15 ml (1/2 oz.)] of high temperatureautomotive grease.3. Slide the flexible cable back in the drive housing. DO NOT getdirt on the flex cable.4. Install the gear housing and shield assembly.NYLON LINE REPLACEMENTLevel 1.Tools required: Head locking tool (if head is to be removed)Parts Required: ECHO 0.095" Nylon Trimmer Line 12m (40 ft.) long. |
Related manuals for Echo SMR-2100
Echo SRM-210 - 01-04 Operator's Manual
Echo SMR-2410 TYPE 1E - 02-99 Operator's Manual
Echo SRM - 211SB Operator's Manual
Echo SRM-210 - 10-05 Operator's Manual
Echo SRM-210 - 02-04 Operator's Manual
Echo RM-210SB Operator's Manual
Echo SRM-266 Operator's Manual
Echo SRM-22GES Operator's Manual
Echo 99944200600 Operator's Manual
Echo SRM-580 Operator's Manual
manualsdatabase
Your AI-powered manual search engine