Echo SRM - 230 Operator's Manual

Also see for SRM - 230S: Operator's manual Operator's manual Parts catalog Operator's manual Operator's manual

Echo SRM - 230 Operator's Manual Manual pdf 16 page image

16STARTING COLD ENGINEWARNINGThe attachment will operate immediately when the engine startsand could result in loss of control and possible serious injury.Keep movable parts of the attachment off the ground and awayfrom objects that could become entangled or thrown.1. Stop SwitchMove stop switch button (A) forward away from the STOPposition.2. ChokeMove choke lever (B) to Cold Start Position ( ).3. Purge BulbPump purge bulb (C) until fuel is visible and flows freely in the clearfuel tank return line. Pump bulb an additional 4 or 5 times.4. Recoil StarterLay the unit on a flat area and keep movable attachment parts clearof all obstacles. Firmly grasp right hand grip and throttle triggerlockout with left hand and fully depress throttle trigger to wideopen position. Rapidly pull recoil starter handle/rope (D) untilengine fires (or maximum five [5] pulls).5. ChokeAfter engine fires (or 5 pulls), move choke lever back to Run ( )position. Hold throttle trigger and throttle trigger lockout fullydepressed, and pull recoil starter starter handle/rope until enginestarts and runs. Release throttle trigger, and allow unit to warm upat idle for several minutes.NOTEIf engine does not start with choke in “Run” position after 5 pulls,repeat instructions 4 and 5.6. Throttle TriggerAfter engine warm-up, gradually depress throttle trigger to increaseengine RPM to operating speed.BCDA