G RASS TRIMMER /BRUSH C UTTEROPERATOR 'S MANUAL 3INTERNATIONAL SYMBOLSThroughout this manual and on the product itself, you will find safety alerts and helpful, informational messagespreceded by symbols or key words. The following is an explanation of those symbols and key words and what theymean to you.SAFETYMANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATIONHotSurfaceCarburetorAdjustment- Idle speedCarburetorAdjustment- High speedmixtureDESCRIPTION SYMBOLSYMBOL"WARNING, SEEOPERATOR'SMANUALWear eye, earand headprotectionEmergencyStopFuel and oilmixtureFinger SeveringCarburetorAdjustment- Low speedmixturePrimerBulbIgnitionON/OFFWear hand andfoot protectionSafety/AlertKeep bystanders and helpersaway 15 m (50 ft.).DO NOT smokenear fuel.DO NOT allowflames or sparksnear fuel.DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTIONChoke Control"Cold Start"Position(Choke Closed)Choke Control"Run"Position(Choke Open)Do not useblades. Stringline onlyWARNINGThe safety alert symbol accompanied by theword “WARNING” calls attention to an act orcondition which CAN lead to serious personalinjury or death if not avoided.CAUTIONThe safety alert symbol accompanied by theword “CAUTION” calls attention to an act orcondition which may lead to minor or moderatepersonal injury if not avoided.DANGERThe safety alert symbol accompanied by theword “DANGER” calls attention to an act orcondition which WILL lead to serious personalinjury or death if not avoided.CIRCLE AND SLASH SYMBOLThis symbol means the specific actionshown is prohibited. Ignoring theseprohibitions can result in serious or fatalinjury.NOTEThis enclosed message provides tips for use, careand maintenance of the unit.IMPORTANTThe enclosed message provides information neces-sary for the protection of the unit.