Echo SRM - 261SB Operator's Manual

Also see for TRIMMER ATTACHMENT SRM-261SB: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

Echo SRM - 261SB Operator's Manual Manual pdf 20 page image

20EQUIPMENT CHECKBefore operation a complete check of the unit must be performed;• Check unit for loose/missing nuts, bolts and screws. Tighten and/orreplace as needed.• Inspect fuel lines, tank and area around carburetor for fuel leaks. DONOT operate unit if leaks are found.• Inspect shield for damage and ensure that the cut-off knife issecurelyin place. Replace if either is damaged or missing.• Check that the cutting attachment is firmly attached and in safeoperating condition.• Check that front handle and shoulder strap or shoulder/waist harnessis adjusted for safe, comfortable operation. See Assembly section forproper adjustment.DETERMINE OPERATION AREAWARNING DANGERInspect starting area for hazards such as rocks, glass, debris etc.which could be contacted by the cutting attachment when starting.Keep helpers and bystanders at least 15 m (50 ft.) from starting area,otherwise serious personal injury may result.• Review the area to be trimmed. Look for hazards that could contributeto unsafe conditions.• Spectators and fellow workers must be warned, and children andanimals prevented from coming nearer than 15 m (50 ft.) while thetrimmer is in use.15 m(50 ft.)