Echo SRM-2100SB, SRM-2400SB Operator's Manual

Also see for SRM - 2400SB: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

Echo SRM-2100SB, SRM-2400SB Operator's Manual Manual pdf 22 page image

22AIR FILTERLevel 1.Tools required: Cleaning brush, 25 - 50 mm (1 or 2 in.) medium bristlepaint brush.Parts required:SRM-2100SB 90008 REPOWERTM AIR & FUEL FILTER KIT.SRM-2400SB 90030 REPOWERTM AIR & FUEL FILTER KIT.1. Close choke (Cold Start Position). This prevents dirt from enteringthe carburetor throat when the air filter is removed. Brush accumu-lated dirt from the air cleaner area.2. Remove the air cleaner cover. Clean and inspect the element fordamage. If element is fuel soaked and very dirty, replace.3. If element can be cleaned and reused, be certain it:•still fits the cavity in the air cleaner cover.•is installed with the original side out.NOTECarburetor adjustment may be needed after air filter cleaning/replacement.FUEL FILTERLevel 1.Tools required: 200-250 mm ( 8 - 10 in.) length of wire with one endbent into a hook, Clean rag, funnel, and an approved ffuel container.Parts required:SRM-2100SB 90008 REPOWERTM AIR & FUEL FILTER KIT.SRM-2400SB 90030 REPOWERTM AIR & FUEL FILTER KIT.WARNING DANGERFuel is VERY flammable. Use extreme care when mixing, storing orhandling, otherwise serious personal injury may result.1. Use a clean rag to remove loose dirt from around fuel cap andempty fuel tank.2. Use the “fuel line hook” to pull the fuel line and filter from the tank.3. Remove the filter from the line and install the new filter.SRM-2100SBSHOWN