Echo SRM-225 Operator's Manual

Also see for SRM-225: Service data Operator's manual Operator's manual Operator's manual Parts catalog

Echo SRM-225 Operator's Manual Manual pdf 22 page image

22 X7722271108© 03/2013 ECHO Inc.MAINTENANCE SRM-225* Replacement is recommended based on the finding of damage or wear during inspection.Air FilterLevel 1.1. Close choke (Cold Start Position [ ]). This prevents dirtfrom entering the carburetor throat when the air filter isremoved. Brush accumulated dirt from air cleaner area.2. Remove air filter cover. Brush dirt from inside cover.3. Remove air filter and lightly brush debris from filter. Replacefilter if it is damaged, fuel soaked, very dirty, or the rubber sealing edges are deformed.4. If filter can be reused, be certain it:• Fits tightly in the air filter cavity.• Is installed with the original side out.5. Install air filter cover.Fuel FilterLevel 1.Fuel is VERY flammable. Use extreme care when mixing,storing or handling, or serious personal injury may result.1. Use a clean rag to remove loose dirt from around fuel capand empty fuel tank.2. Use the “fuel line hook” to pull the fuel line and filter from the tank.3. Remove the filter from the line and install the new filter.Note: Federal EPA regulations require all model year 2012 and later gasoline powered engines produced forsale in the United States to be equipped with a special low permeation fuel supply hose between thecarburetor and fuel tank. When servicing model year 2012 and later equipment, only fuel supplyhoses certified by EPA can be used to replace the original equipment supply hose. Fines up to$37,500 may be enforced for using an un-certified replacement part.Parts Required: REPOWERTM AIR & FUEL FILTER KIT.Parts Required: REPOWERTM AIR & FUEL FILTER KIT.