Echo SRM-225 Operator's Manual

Also see for SRM-225: Service data Operator's manual Operator's manual Operator's manual Parts catalog

Echo SRM-225 Operator's Manual Manual pdf 8 page image

8 X7722271108© 03/2013 ECHO Inc.SAFETY SRM-225Avoid Hot Surfaces• Keep exhaust area clear of flammable debris. Avoid contactduring and immediately after operation.EquipmentUse only ECHO approved attachments. Serious injury may result from the use of a non-approvedattachment combination. ECHO, INC. will not be responsible for the failure of cutting devices,attachments or accessories which have not been tested and approved by ECHO. Read and complywith all safety instructions listed in this manual and safety manual.• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.• Inspect shield for damage and ensure that the cut-off knife is securely in place. Replace if either isdamaged or missing.• Check that the cutting attachment is firmly attached and in safe operating condition.• Check that handle and harness (if included) are adjusted for safe, comfortable operation. See AssemblySection for proper adjustment.Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objectsaway from all openings.• ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to acomplete stop before removing obstructions, clearing debris, or servicing unit.• DO NOT start or operate unit unless all guards and protective covers are properly assembled tounit.• NEVER reach into any opening while the engine is running. Moving parts may not be visiblethrough openings.Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage orleaks are found, do not use unit, otherwise serious personal injury or property damage may occur.Have unit repaired by an authorized servicing dealer before using.