Echo SRM-266T Operator's Manual

Also see for SRM-266T: Operator's manual Operator's manual

20 X7502026103© 6/2013 ECHO Inc.OPERATION SRM-266TMove stop switch (A) away from the STOP position.2. Purge BulbPump purge bulb (C) until fuel is visible and flows freely in theclear fuel tank return line. Pump bulb an additional 4 or 5times.3. Recoil StarterLay the unit on a flat area and keep movable attachment partsclear of all obstacles. Firmly grip throttle handle and throttletrigger lockout with left hand. Rapidly pull recoil starterhandle/rope (D) until engine fires.Note: If engine does not start after 5 pulls, use Cold StartProcedure.Stopping Engine1. ThrottleRelease throttle and allow engine to return to idle beforeshutting off engine.2. Stop SwitchMove stop switch (A) to STOP position.If engine does not stop when stop switch is moved to STOPposition, close choke - COLD START position - to stallengine. Have your ECHO dealer repair stop switch before using unit again.BCDDA