- 12 -Clip to the power unit and adjust for length and comfort.(Photo 4-5)VI. CHAINSAW LOPPER ATTACHMENTAssemblyThis also need to be assembled and comprises the following parts:WARNING:BE SURE TO FILL THE OIL RESERVOIR WITH THE APPROPRIATE CHAIN OIL OTHERWISEYOU WILL SEIZE AND BURN OUT THE CHAINIMPORTANT:The chain must neither be too tight or too loose. You must be able to lift the chain a few mmaway from the bar.Should you need to adjust the tension, check the procedure that follows.Should you need to change the chain, check the procedure that follows.Install the guide bar and the saw chain on the gear case as followsPhoto 6Photo 4Photo 5

I. SYMBOLS / PICTURES MARKED ON THE PRODUCT OR USED IN MANUAL

II . GENERAL SAFETY INSTRUCTIONS

III. PARTS IDENTIFICATION

IV. TECHNICAL DATA

VI. CHAINSAW LOPPER ATTACHMENT

VII. HEDGE TRIMMER ATTACHMENT

IX.CONNECTION

XI. MAINTENANCE

XIII. GUARANTEE

Eckman EKEMS2 Instruction Manual

EKEMS2