Eckman EKEMS2 Instruction Manual

Contents

Eckman EKEMS2 Instruction Manual Manual pdf 4 page image

- 3 -Cutting length of chainsaw lopper 220mmCutting length of hedge trimmer 400mmCutting length of brush cutter 230mmCutting length of grass trimmer 400mmWARNING: Read and understand all instructions. Deviation from these instructions can result inserious injury.II . GENERAL SAFETY INSTRUCTIONProper safety precautions must be observed. Like all power equipment this unit must be handledcarefully. DO NOT EXPOSE YOURSELF OR OTHERS TO DANGER. Follow these general rules.Do not permit others to use this machine unless they are thoroughly responsible and have read andunderstood the machine manual and are trained in its operation.● Always wear approved safety goggles for eye protection. Long hair should be tied back. Dressproperly, Do not wear loose clothing or jewelry that could become caught in moving parts of theunit. Safe, sturdy, non-skid footwear should always be worn. It is recommended that legs andfeet be covered to protect from flying debris during operation.● Inspect the entire machine for loose parts (nuts, bolts, screws, etc.). Repair or replace asnecessary before using the machine. Do not use any attachment with this power head other thanthe ones recommended by our company. Serious injury to the operator or bystanders could resultas well as damage to the machine.● Keep the handles clean and free from oil and lubricants.● Always use the handles and shoulder strap provided when cutting.● Never remove the lopper attachment lubrication oil tank cap while the engine is running.● Never attempt to make motor adjustments while the unit is running and strapped to theoperator. Always make motor adjustments with the unit resting on a flat, clear surface.