Names of controls and parts11IIITurning the power on and offWhen the power is turned ON, the last sourcemode (such as CD and tuner) used prior toturning OFF the power will be restored.When the vehicle has no ACC position on theignition switch, care is needed when turning offthe equipment. Follow Step 2 or Step 3 whenturning off the power.The power will come ON.ATTENTIONWhen the equipment's power is turned onfor the first time or if the battery terminalshave been disconnected because ofvehicle maintenance and the power is thenturned back on, the equipment will start upin FM1 mode. After this, the broadcaststations will be searched for automaticallyand stored in buttons [1] to [6].The power will go OFF and theequipment will be in Standby.If you press the [PWR] button again formore than one second, the power willgo completely off.The power will go completely OFF.ATTENTIONIf a car is not equipped with an ACC position,press the [PWR] button for more than twoseconds.1 When power is OFF, press the[PWR] button.2 When power is ON, press the[PWR] button for less than twoseconds.3 When power is ON, press the[PWR] button for more than twoseconds.
