56Various SettingsMaking changes with Function ModeA variety of settings can be changed.Switching the Function ModeThe Menu Selection mode is activated.The function mode is activated.When the button is pressed, thesetting item changes in the followingorder.AreaShot*1 ↔ Title*3 ↔Station Name*2↔ Guide Tone ↔ Clock ON/OFF ↔Clock Adjust ↔ Demo ↔ HD RADIO*4↔ AUX ON/OFF*5 ↔ AUX Sensitivity*5↔ Steering SW Data ↔ SIRIUS ID*6 ↔XM ID*7 ↔ AVL Setting*8*1: Refer to page 41 for details onArea shot operation.*2: Cannot make settings other thanfor tuner operation.*3: Cannot make settings other thanfor CD/CD changer operation.*4: This setting can only be chosenwhen an optional HD Radio tunerunit is connected. (Refer to page64 for details on HD Radiooperation.)*5: Refer to page 76 for detail on AUXoperation.*6: This setting can only be chosenwhen an optional SIRIUS Satelliteradio tuner unit is connected.(Refer to page 70 for details onSIRIUS Satellite radio operation.)*7: This setting can only be chosenwhen an optional XM Satelliteradio tuner unit is connected.(Refer to page 67 for details on XMSatellite radio operation.)*8: This setting can only be chosenwhen an optional GPS unit isconnected.Setting station name/disc title(Station Name/Title)The name of the station being received, or thetitle of the CD being played can be set.ATTENTION• No CD text disc can be set.• Setting cannot be performed when anoptional HD radio tuner unit is connected,or during SIRIUS satellite radio reception.Station Name or Title will be selectedbased on the current audio modesettings.The title setting mode is activated.Pressing the button will switch typesfrom [ABC] (upper-case alphabetcharacters) to, [123] (numericcharacters) and then [!"#] (symbols).1 Press the [CUSTOM/MENU] buttonfor more than one second.2 Press the [SELECT] (Upper/Lower)button to select the FUNC thenpress the [ENTER] button.3 Press the [SELECT] (Upper/Lower)button to select the setting item.1 Press the [SELECT] (Upper/Lower)button to select the Station Nameor Title.2 Press the [ENTER] button.3 Press the [SCREEN] button toselect the character type.
