25Basic operationWhen a CD is already loaded, press the [SOURCE] buttonrepeatedly to switch to the CD mode.Q Listening to the tuner1 . Press and hold the [SOURCE] button until themode switches to the tuner mode.This will turn the tuner on.To turn the tuner off, press the [SOURCE] button eithershorter to select another mode or longer to turn thepower off.2 . Tap the [ BND ] button to switch to thedesired FM or AM bands.[BND ] button Switch the FM band.Pressing the button repeatedlyswitches the FM band in the order ofFM1 £ FM2....[BND ] button: Switch the AM band.Pressing the button repeatedlyswitches the AM band in the order ofAM1 £ AM2....It is also possible to change the numbers of FM and AMbands in a certain combination of them (See Page 56).3 . Press the [ TU ] button to tune to a station.A tap on either the [ TU ] button for less than onesecond will enable manual station tuning. Hold onebutton down for more than two seconds to start theautomatic station search.[TU ] button: Starts searching toward higherfrequencies.[TU ] button: Starts searching toward lowerfrequencies.If stations have been stored in memory, pressing a buttonfrom [1] to [6] will directly select a station. (Refer to thesection “Manually setting stations into memory” on page 48)
