93If you have a question:Q Displayed information(for troubleshooting)The information listed in the chart below is displayed to showthe status of the tape player and CD changer. Refer to thechart for the appropriate action.Information Code Table When "INFO " flashes on the indicatorNos.2~7 are displayed.Information Contents Explanation and remedial action to take2 NO DISC LOADED IN There is no disc in the magazine or player. LoadTHE MAGAZINE a disc in the magazine. (Load a music disc.)3 DISCS ARE DIRTY OR The loaded disc is dirty or upside down. CheckDAMAGED it for proper orientation and verify it is clean.5 CD CHANGER FAILS •The CD changer is inoperative for some reason.MECHANICALLY Go through the magazine removal procedure.•If a magazine fails to eject, have your dealer fixthe problem.6 WHEN THE CD CHANGER •The temperature in the CD changer is too high forINTERNAL TEMPERATURE IS operation. Wait till it cools down.HIGH (TO PROTECT PICKUP •Resume playing after the “High temperature sensedUNIT) and CD stopped" display disappears. If the CD stillcannot play, have your dealer repair it.7 AN INTERNAL POWER •Turn the ACC off once before turning it on onceSUPPLY FAILURE IS again to resume the operation.OCCURRING WITH THE •If the function still cannot be restricted, contact yourAUTO CHANGER dealer.Information Contents Explanation and remedial action to takeLOAD CD changer is in the process of verifying thepresence of CDs after a magazine has beeninserted into the CD changer.DATA FULL Indicates that additional title entry has beenattempted when the title memory (maximumcapacity: 30100 titles) of CDs is full.
