201Mounting instructionXIXNames of lead wires and destinations(refer to Page 204)● Caution ●Never connect the power supply to the speaker leads, otherwise itcauses damage to the main unit.● Note ●To prevent unconnected leads from shorting out, insulate them bywrapping their tips with electrical tape. Similarly, insulate the endsof connected leads.If an external amplifier is to be connected to the receiver, be sureto ground its outside housing to the vehicle body (a metal part).No. Name Wire color Destination1 ACC Red Connect where the power comeson when the ignition is in theACC position.2 B+ Yellow Connect where the power isconstantly available, regardlessof the ignition switch's position.3 Ground Black Connect where good bodygrounding is available.4 Antenna power supply Blue Connect to the automatic-antenna control terminal of thevehicle.5 Illumination powersupplyOrange/white Connect to where power comeson when the headlights areturned on.6 Control power supply Blue/white Connect to the control terminalfor the external amplifier, etc.7 E-LAN terminal Connect to the E-LAN terminal ofthe CD changer, etc.89Line-out terminals (Front)Line-out terminals (Rear)Connect to the RCA inputconnectors of an externalamplifier.10 Line-out terminals (Nonfader) Connect to the RCA inputconnectors of a EQ, or the RCAinput connectors of a wooferamplifier.11 Speaker leads Connect them to their respectiveleads.
