27ESN security operating procedureIIIHow to cancel the Key CDCheck that the unit is in standby.Press and hold the [FUNC] button, then button [6],and hold both for more than one second.A [SEC] message appears, then in two seconds it will changeto [DISC].Press the [OPEN] or [CD ] button.The front panel opens; The CD8445 is now ready for your KeyCD in the CD slot.Insert your Key CD into the slot.A [CANCEL] message appears, then the Key CD is ejected.The Key CD is cancelled.Press the [OPEN] or [CD ] button.The front panel closes.● If there is a problem with the inserted CD, an [ERR] messagewill appear for two seconds and the CD will be ejected. Reinsertthe ejected CD.● If a CD causes the [ERR] message to appear twice in a row, a[CHANGE] message will appear for two seconds. Try anotherCD.● Copy Protected CD and MP3/WMA CD-ROM cannot be programmedfor Key CD security.● The Security indicator will flash whenever the vehicle's ignitionis switched off.If a CD has already been inserted, a [SEC] message appears, andthen the front panel opens and the CD is ejected.● This process cancels the protection for ESN deck.● If power to the ESN deck is disconnected, then reconnected, aKey CD will not need to be inserted in order to return the unit tonormal operation.● Inserting a CD other than the Key CD will not cancel theprotection. Instead, the display [ERR] for two seconds, then thenormal CD playback mode will activate.
