V-Series Panels| User GuidePage 118Figure 6-71: Output levels menu (selected label mode) for desktop panelsThe +0 dB represents the output level for the audio source of the label andmay be adjusted using the up and down buttons below the level display or therotary encoder.Select the RESET key or talk button to reset the output levels to the default of0dB. Pressing the Reply key or Reply key talk button (OUTPUT LEVEL) willreturn you to the Sort Group menu.Note: When you set the output level for an audio source, you are setting the inputlevels for the entire matrix and not just an individual panel.Input and output settings can only be made for the local matrix. Gains forother matrices can be achieved within ECS / EHX.6.8 DIAGNOSTIC menuThe DIAGNOSTIC menu is accessed from the top level menu.Figure 6-72: Diagnostic menu for rack mounted panels
