V-Series Panels | User Guide (draft, not yet released)Page 66Reset panelcrosspoint gainsto OdB.Opens the Reset Xpts (Yes/No)dialogue box. Selecting Yes resetsthe volume adjustment on allincoming audio sources to 0dB.LED is on whilethe Reset Xptsmenu is open.Alternate text Enables/disables the Alt Text modeon the panel. Pressing this key willcause the key displays to showalternative text. Press the key againto return to standard text.LED is on whilethe Alt Text modeis enabled.ScrollingassignmentWhen this option is selected,pressing the function key will resultin all keys programmed with SortGroups flashing. You can then usethe up and down keys on the Keysetcontrols to scroll through groupmembers. When a group member isvisible in the key display, Talk andListen to that member.LED is on whileScrollingAssignmentmode is enabled.Pressing thefunction key againwill exit fromscrollingassignment mode.This mode has a10 secondtimeout.Supervisor When this option is allocated to afunction key, pressing the key willenable the first stage of Supervisormode. See Supervise mode in theEclipse V-Series User Guide.LED is on whileSupervise modeis enabled. To exitSupervise mode,press and hold theMenu key.Please note thatthe method ofexiting Supervisemode is not thesame as for otherfunction keys.Message menu Access the menu that allows you tocontrol message function options.LED is on whilethe Message menuis open.Table 20 V32LDE function key options (can be set in EHX software)5.15.3 Change function key options on a V32LD panelUse the EHX configuration software to change function key settings on a V32LDpanel.Open EHX and navigate to Cards and Ports.
