Ecoair ECO911S Installation And Operation Manual

Contents

Ecoair ECO911S Installation And Operation Manual Manual pdf 10 page image

Names and functions of wireless remote control●ON/OFF buttonON/OFFRemote controlSignal transmitter▲▲▲▲▲AUTOCOOLDRYFANHEATFan 2Fan 1Fan 3 Fan 4Don't drop or throw the remote control; Don't let any liquid the remote controlput the remote control directly under the sunlight or .● Press this button, Auto, Cool,Dry, Fan,Heat mode can be selected circularly.MODE buttonMODEAuto mode is default while power on.Under Auto mode,the temperature will notbe displayed; Under Heat mode, theinitial value is 28℃ ;Under othermodes, the initial value is 25℃ .● Press this button, Sleep On and SleepOff can be selected. After powered on,SleepSLEEP buttonSLEEPOff is defaulted. After the unit is turnedoff, the Sleep function is canceled. AfterSleep function set up, the signal of Sleepwill display. In this mode, the time of timercan be adjusted. Under Fan and Automodes, this function is not available.● By pressing this key, you may select AUTO,FAN 1, FAN 2, FAN 3 or FAN 4, and mayFAN buttonFANcool or heat mode. After being energized,AUTO is defaulted. Only LOW fan can beset under DRY mode, pressing this keyOperation of wireless remote control( oF)82( oF)77Press this buttonsend message.can not adjust the fan speed, but can8also cycle between them. FAN 4 only in●SWING buttonSWINGPress this key to activate or deactivatethe swing.AUTO COOL DRYFANHEAT- 6 -