Ecoair ECO911S Installation And Operation Manual

Contents

Ecoair ECO911S Installation And Operation Manual Manual pdf 20 page image

Notices for installationImportant Notices1.Installation work must be done by competent or qualified persons according to localrules and this manual.2.All electric supply to the unit must be carried out by qualified electrician.3.Reinstallation of the unit must be carried out by qualified persons.4.The appliance must be positioned so that the power supply is accessible.Basic Requirements For Installation PositionInstallations in the following place may cause malfunction.● Locations where strong heat sources, vapours, flammable gas or volatile object areemitted.● Locations where high-frequency waves are generated by radio equipment, weldersand medical equipment.● Locations such as coastal areas where a lot of salinities exists.● Locations where oil (eg. machine oil) is contained in the air.● Locations such as hot spring zones where a sulfured gas is generated.Indoor Unit Installation Position Selection1.The air inlet and outlet vent should be far from any obstruction, make sure that air iswell ventilated throughout the whole room.2.Select a position where the condensing water can be easily drained out, and the placeis easily connected for outdoor unit.3.Select a location where it is out of children reach.4.Select a location where is strong enough to withstand the full weight and vibration ofthe unit.5.Leave sufficient space to allow access for routine maintenance. The height of theinstalled location for the indoor unit should be 250cm or more from the floor.6.Select a place about 1m or more away from TVset or any other electric appliances.7.Select a place where the filter can be easily taken out.8.The indoor unit should be installed according with installation dimension diagramrequirements.9.Do not use the unit in the immediate surroundings of a laundry, bath, shower orswimming pool.-16-