Ecom J2KNpro Tech Operating Instructions Manual

Also see for J2KNpro Tech: Operating instructions Operation manual Quick guide Operation manual Quick guide

Ecom J2KNpro Tech Operating Instructions Manual Manual pdf 21 page image

ecom-J2KNpro TECH Page 2111. Flue gas analysis11.1. Gas analysisAfter warm-up and calibration phase, the instrument switches over tothe measurement mode. The gas measurement values can beviewed on different display pages. Use the cursor keys to scroll thepages.With you can switch from the measured value display to amenu or selected before (see chapter Adjustments). Possible menuoptions are: Soot... Oil trace, Data processing, Adjustments, Control,Fuel type, Standby, Purge, Eff. (C), Memory -> M, CLD NO <-> NOx,WLAN, Pressure. Further you can switch with from any menuback to the measured value display.With you can print and store the measured values into theintermediate memory at the same time.With you can switch off the CO sensor, in order to protect thesensor against too high concentrations (only required forelectrochemical CO sensor). The automatic disconnection will switchoff the CO sensor at approx. 2500 ppm (also for CO IR).With you can switch from the measured value display to amenu selected before (see chapter Adjustments). Possible menuoptions are: Soot... Oil trace, Data processing, Adjustments, Control,Fuel type, Standby, Purge, Eff. (C), Memory -> M, CLD NO <-> NOx,To compensate a possible sensor drift, it isimportant to calibrate the instrument with freshair at regular Intervals!HotkeyHotkeyStore and printmeasuredvalues Switch offCO-SensorO2 3.2 %CO2 13.1 %T.Gas 184.4 °CT.Air 20.3 °CGas analysis 25.11.07