Ecom J2KNpro Tech Operating Instructions Manual

Also see for J2KNpro Tech: Operating instructions Operation manual Quick guide Operation manual Quick guide

Ecom J2KNpro Tech Operating Instructions Manual Manual pdf 43 page image

ecom-J2KNpro TECH Page 4314.4. Data logging with DASNT2In addition to data logger recordings the data could also betransferred online via USB, Bluetooth (option) or via data interface tothe software "DASNT2". For the USB connection, a driver isrequired. Software and USB driver are available free of charge fromthe ecom website. The following transfer parameters must be set atecom-J2KNpro TECH ("Adjustments" /" Internal "/" USB "):- 1200 Baud- Protocol DASPlease note the hints in the software manual.14.5. Data processing with DAS5To display and storage of measured values and measured valuegradients the software "DAS5" is available. With the help of a multi-media card customer and measurement data can be exchangedbetween software and instrument. An online connection to storemeasured values and measured value gradients is possible withUSB or WLAN. For the USB connection, a driver is required.Software and USB driver are available free of charge from the ecomwebsite. The following transfer parameters must be set at ecom-J2KNpro TECH ("Adjustments" / "Internal " / "WLAN"):- 1200-38400 Baud (setting as in the software "DAS5")- Protocol EnhancedFor the wireless connection (WLAN), the following transferparameters have to be set at ecom-J2KNpro TECH ("Adjustments"/ "Internal " / "WLAN"):- Access Point = ON- Auto Connect = ONPlease note the hints in the software manual.