Capturing a blade consoleYou can use the AOM Command Menu Capture blade console option to manage the other blades installedin the chassis.1. Log on to the system using either the serial console or SSH.2. Type the following key sequence:Esc (The AOM Command Menu displays.3. Type C to select the Capture blade console menu option.4. When you are prompted to select a blade, type the slot number (1-4) for the blade that you would liketo manage.Note: If the specified blade's console is already being redirected, you will be prompted to confirmthat you still want to capture the specified blade's console.A message similar to the following confirms that you are now viewing the console for the specifiedblade: Connecting to blade in slot n...success.You can now run AOM commands on the specified blade. Repeat steps 3 and 4 to capture another blade'sconsole.22The VIPRION 2400 platform
