FAST ComTec MCDWIN User Manual
                                                           | |
Contents
| 
MCDWIN ProgramComTec GmbH 5-9Display...The Display menu item or the corresponding icon opens the Display Options dialog box.Here the graphic display mode of single spectra can be chosen. The 'type' combo box gives achoice between dot, histogram, spline I and line.'Dot' means that each spectra point is shown as a small rectangle, the size of this rectangle canbe adjusted with the size combo box. 'Histogram' is the usual display with horizontal and verticallines, 'spline I' means linear interpolation between the points, and 'line' means vertical lines fromthe ground to each spectra point.If the displayed spectra range contains more channels as pixel columns are available in the videographic display, usually only the maximum value of the channels falling into that pixel columns isdisplayed. But it can also explicitly specified by marking the checkboxes „Max Pixel“, „MeanPixel“ or „Min Pixel“ which value will be displayed. It is also possible to display all three possiblevalues in different colors that can be chosen in the colors dialog. For the „Mean Pixel“ a Thresholdvalue can be entered; channel contents that are below this value are then not taken into accountfor the mean value calculation.Axis...By the Axis... menu item or the respective icon, the Axis Parameters dialog box is opened.Figure 5.8: Colors dialog boxFigure 5.9: Display Options dialog box |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine