FDS FD215CV-C-5 Installation And Operation Manual

Contents

Document Number:MAN – FD215CV-C-5Rev:BRevision Date:01/10/2017Page 19 of 25© 2017 FDS Avionics Corp.All Rights Reserved.TECHNICAL SUPPORT470-239-7421 or FDSAvioncis.comPIP Button:Short press of PIP enables and disables the PIP display. If PIP is disabled, then a short pressenables it. If it is enabled, then a short press disables it.When enabling PIP, if the computer is displayed in the main screen area, then the PIP areacontains the last requested Quad, 1, 2, 3, or 4 video source.If any video source is displayed in the main screen area, then the PIP area contains thecomputer source.Long press of PIP:If PIP mode is enabled then a long press of the PIP button swaps the PIP and Main images.If PIP mode is not enabled, then a long press of the PIP button will swap the last requestedcomputer source and the last requested video source. If computer is currently displayed, thena long press of the PIP button will put the last requested video channel (SDI 1, SDI2, SDI3,SDI4, or Quad view of all four SDI sources) into the full screen view on the monitor. If any ofthe video modes are currently displayed, then a long press of the PIP button will put the lastrequested computer channel into the full screen view on the monitor.o With PIP On: Swaps sources between Main window and PIP windowo With PIP Off: Swaps sources (computer or video) on the Main window