14Glide-out Grillnn Before you remove any of the grill parts for cleaning.make sure that they are cool, or use oven gloves.The grill pan and trivet can be easily removed for cleaning.Wash the grill pan and trivet in hot soapy water.After grilling meats or any foods that soil, leave to soak fora few minutes in the sink immediately after use. Stubbornparticles may be removed from the grid by using a nylonbrush.Alternatively, wash the grill pan in a dishwasher.To remove the grill pan, pull the grill pan forwards (Fig.5-6)and then lift the grill pan clear of the support frame (Fig.5-7).The support frame is held to the side rails by two clips oneach side (Fig.5-8). For each side, support the side rail withone hand and with the other hand lift up and out of the sideclips.For safety, push the side rails back into the grill chamber.If you need to remove the telescopic runners to allowcleaning of the grill chamber, first remove the grill tray thenyou can unhook them from the grill chamber sides (Fig.5-9).Wipe the sides clean with a soft cloth and mild detergent.DO NOT put the side runners in a dishwasher.Once you have finished, hook the side rails back onto thesides of the chamber. To refit the frame pull the side railsforward and for each side in turn, support the side rail andpress the frame down in to the side rails.Replace the grill pan.Control Panel and Oven DoorsAvoid using any abrasive cleaners including cream cleaners,on brushed stainless steel surfaces. For best results, use aliquid detergent.The control panel and control knobs should only be cleanedwith a soft cloth wrung out in clean hot soapy water but takecare that no surplus water seeps into the appliance. Wipewith a clean dampened cloth then polish with a dry cloth.The oven doors should only be cleaned with a soft clothwrung out in clean hot soapy water.Fig.5-6Fig.5-7Fig.5-8ArtNo.331-0005 Removing the grill railFig.5-9