Falcon 1092 Deluxe User's Manual & Installation Instructions

Also see for 1092 Deluxe Dual Fuel: User guide User's guide & installation instructions User's manual & installation and servicing instructions User's manual & installation and servicing instructions

Falcon 1092 Deluxe User's Manual & Installation Instructions Manual pdf 18 page image

141 2 3Ovens‘Cook & Clean’ PanelsThe ovens have side ‘Cook & Clean’ panels which have beencoated with a special enamel that partly cleans itself. Thisdoes not stop all marks on the lining, but helps to reduce theamount of manual cleaning needed.These panels work better above 200 °C. If you do most of yourcooking below this temperature, occasionally remove thepanels and wipe with a lint free cloth and hot soapy water.The panels should then be dried and replaced and the ovenheated at 200 °C for about one hour. This will ensure that thepanels are working effectively.nn DO NOT use steel wool (or any other materials thatwill scratch the surface).nn DO NOT use oven cleaning pads.The Oven Shelf SupportsThe shelf supports on the oven sides can be removed forcleaning.Removing the Oven Shelf SupportsRemove the oven shelves. Pull the top of the shelf support upand away from the oven side and then lift the support awayfrom the locating bracket at the bottom of the oven side(Fig.5-8).Refitting the Oven Shelf SupportsTo refit the side support. Locate the tag at the bottom of thesupport into the slot in the locating bracket in the oven side(Fig.5-9). Now locate the tops of the side arms in the holes atthe top and gently push down.Fig.5-8Fig.5-9