Falcon 110 Dual Fuel Instructions For Use And Installation

Also see for Classic 110 Dual Fuel: User guide & installation & service instructions User guide & installation & service instructions User's guide & installation instructions User guide User's guide & installation instructions

Contents

Falcon 110 Dual Fuel Instructions For Use And Installation Manual pdf 24 page image

English24lowered). If the cooker is not level arrange for your supplier tolevel it for you.Oven not coming on when turned on manuallyIs the power on? Is the clock illuminated? If not there may besomething wrong with the power supply. Is the cooker supplyon at the isolator switch? Is the clock flashing 0.00? If so setit to the correct time of day. Has the Timer been set to AUTOby mistake? If AUTO is showing on the clock display, press the‘cook period’ button and reduce any set cooking time show-ing to 0.00, with the (+) and (-) buttons. Press the ( ) buttontwice. If this does not solve the problem contact a serviceperson.Is the key symbol ( ) showing in the display? See the Clocksection of the instructions for more information on the keylock feature of the clock.Oven not coming on when automatic cookingTimer set correctly but oven knob left OFF by mistake?Is the key symbol ( ) showing in the display? See the Clocksection of the instructions for more information on the keylock feature of the clock.Oven temperature getting hotter as the cooker gets olderIf turning the knob down has not worked or only worked for ashort time then you may need a new thermostat. This shouldbe fitted by a service person.Grill not cooking properlyAre you using the pan and trivet supplied with the cooker? Isthe pan being used on the runners, not the floor of the com-partment? Is the grill tray pushed fully back to stop?The oven light is not workingThe bulb has probably blown. You can buy a replacementbulb (which is not covered under the guarantee) from a goodelectrical shop. Ask for an Edison screw fitting 15w 240v lamp,FOR OVENS. It must be a special bulb, heat resistant to 300°C.Open the oven door and remove the Handyrack (if fitted) andoven shelves.Turn off the power supply.Unscrew the bulb cover by turning anticlockwise. Unscrewthe old bulb. Screw in the new bulb. Screw on the bulb cover.Turn on the electricity supply and check that the bulb nowlights.A crack has appeared in the Warmer plate’s surfaceDisconnect the cooker immediately from the power supplyand arrange for its repair. Don’t use the cooker until after therepair. Contact a service person.Hotplate ignition or hotplate burners faultyIs the power on? Is the clock illuminated? If not there maybesomething wrong with the power supply.Are the sparker (ignition electrode) or burner slots blocked bydebris?Is the burner trim correctly located?Are the burner caps correctly located?See the section entitled ‘Cleaning your cooker’Check that there is not a problem with your gas supply. Youcan do this by making sure that other gas appliances you mayhave are working.Do the burners spark when you push the button? If not checkthe power is on - is the clock illuminated?Power failureIn the event of a failure in the electrical supply the hotplatemay be lit using a match.General Safety InstructionsThis appliance must be installed by a competent person inaccordance with the installation instructions. The installationmust comply with the relevant regulations and also the localelectricity supply company requirementsIf You Smell GasDon’t turn electric switches on or off.Don’t smokeDon’t use naked flamesDo turn off the gas at the meter or cylinderDo open doors and windows to get rid of the gasCall your gas supplier.This appliance is designed for domestic cooking only. Usefor any other purpose could invalidate any warranty orliability claim.The use of a gas cooking appliance results in the productionof heat and moisture in the room in which it is installed. En-sure that the kitchen is well ventilated: keep natural ventila-tion holes open or install a mechanical ventilation device,(mechanical extractor hood).Prolonged intensive use of the appliance may call for ad-ditional ventilation, for example opening a window, or moreeffective ventilation, for example increasing the level ofmechanical ventilation where present.The cooker must be installed by a qualified electrician inaccordance with the installation instructions. It should beserviced by a qualified service engineer and only approvedspare parts used. Have the installer show you the location ofthe cooker control switch. Mark it for easy reference. Alwaysallow the cooker to cool and then switch off at the mains andbefore cleaning or carrying out any maintenance work, unlessspecified otherwise in this guide.All parts of the cooker become hot with use and will retainheat even after you have stopped cooking.Take care when touching cooker. To minimize the possibilityof burns, always check that the controls are in the OFF posi-tion and that it is cool before attempting to clean the cooker.Use dry oven gloves when applicable - using damp glovesmight result in steam burns when you touch a hot surface.Never operate the cooker with wet hands.Do not use a towel or other bulky cloth in place of a glove.They might catch fire if they touch a hot surface.Clean with caution. If a wet sponge or cloth is used to wipespills on a hot surface, be careful to avoid steam burns. Somecleansers can produce noxious fumes if applied to a hotsurface.Do not use unstable saucepans and position the handlesaway from the edge of the hotplate.Babies, toddlers and young children should not be allowednear the cooker at any time. They should never be allowed to