22.0 OPERATION2.1 COMPONENT PARTS

APPLIANCE INFORMATION

OPERATION

CONTROLS

USING THE APPLIANCE

CLEANING AND MAINTENANCE

SPECIFICATION

DIMENSIONS / CONNECTION LOCATIONS

INSTALLATION

ASSEMBLY

ELECTRIC SUPPLY & CONNECTION

SUITING

SERVICING

TEMPERATURE CONTROL & TAP REMOVAL

SWITCH PANEL REMOVAL

ELEMENT COVER REMOVAL

TAP REMOVAL

CIRCUIT DIAGRAMS

WIRING DIAGRAMS

ACCESSORIES

FAULT FINDING

SPARE PARTS

Falcon E9241 User, Installation And Servicing Instructions

COMMISIONING

DOOR REMOVAL

CONTROL PANEL REMOVAL

OPERATING & SAFETY THERMOSTAT REMOVAL

ELEMENT REMOVAL

SERVICE INFORMATION

F900 SERIES

USING THE FRYER – NORMAL OPERATION

USING THE FRYER – ECO MODE

cleaning and maintenance

COMMISSIONING

TEMPERATURE CONTROL & NEONS REMOVAL

MODE CONTROL, PUMP SWITCH & SAFETY THERMOSTAT REMOVAL

OPERATING AND SAFETY THERMOSTAT SENSOR REMOVAL

TERMINAL BLOCK ACCESS PANEL REMOVAL

CONTACTOR REMOVAL

ELEMENT ROTATING HANDLE REMOVAL

HEATING ELEMENTS AND MICROSWITCH REMOVAL

PUMP & TIMER REMOVAL (FROM FRONT)

PUMP & TIMER REMOVAL (FROM REAR)

PUMP TIMER SETTINGS FOR 230V

fault finding

spare parts

service information

FLUE CAPPER

TABLE B – Heat Inputs

GAS SUPPLY & CONNECTION

COMMISSIONING - HOB

CONVERSION

INJECTOR (HOB)

REMOVAL OF DOOR

INJECTOR (OVEN)

PILOT (OVEN)

GAS VALVE (HOB)

GAS VALVE (OVEN)

PRESSURE ADJUSTMENT

SERVICING INFORMATION

CONTROLS G9341/F

USING THE APPLIANCES

TABLE B – G30/G31

VENTILATION

FASTRON CONTROLLER & NEONS

SWITCH PANEL

SWITCH & NEON REMOVAL

ACCESS TO SPARK BOX

SIT GAS REGULATOR ACCESS

PUMP & TIMER REMOVAL

INJECTORS

CONTROL PANEL

GAS VALVE

GOVERNOR

ACCESS PANEL

PILOT REMOVAL

PLATE / THERMOSTAT BULB REMOVAL

BURNER

General reminders

Construction

Technical data

Commissioning and testing

Warnings and hints for user

Cleaning and care of the appliance

Special procedures in case of failures

View of appliance

Controls

APPLIANCE INFORMATION

TURNING THE BURNERS OFF  1

OVEN  1

SPECIFICATION  1

TABLE B –  Heat Input, G20  1

BURNER CONFIGURATIONS  1

DIMENSIONS / CONNECTION LOCATIONS  1

INSTALLATION  1

GAS SUPPLY & CONNECTION  1

CONVERSION  1

oven door removal

COMPONENT PARTS

DIMENSIONS / CONNECTION LOCATION

ELECTRICAL SUPPLY AND CONNECTION

SERVICING AND CONVERSION

REPLACING CONTROL SWITCH/LED INDICATORS

HOB ASSEMBLY

CIRCUIT DIAGRAM

WIRING DIAGRAM

technical details

Installation conformity

Positioning

Control of primary air flow

Minimum output adjustment

Troubleshooting

Instructions for use

Daily cleaning

How to proceed, if

Gas cock

Pilot burner

Main burner

PTFE FITTING

SITING / CLEARANCES

ACCESS PANEL REMOVAL

ENERGY REGULATOR, SWITCH AND NEON REMOVAL

HEATING ELEMENTS REMOVAL

Installation

Basic operation

FILTRATION

TEMPERATURE CONTROL, NEON AND COVER CAP REMOVAL

DRAIN VALVE REMOVAL

HEATING ELEMENT AND MICROSWITCH REMOVAL

E9241


Contents Table Of Contents APPLIANCE INFORMATION OPERATION CONTROLS USING THE APPLIANCE CLEANING AND MAINTENANCE SPECIFICATION DIMENSIONS / CONNECTION LOCATIONS INSTALLATION ASSEMBLY ELECTRIC SUPPLY & CONNECTION SUITING SERVICING TEMPERATURE CONTROL & TAP REMOVAL SWITCH PANEL REMOVAL ELEMENT COVER REMOVAL TAP REMOVAL CIRCUIT DIAGRAMS WIRING DIAGRAMS ACCESSORIES FAULT FINDING SPARE PARTS	22.0 OPERATION2.1 COMPONENT PARTS Previous Next / 31