Falcon PROFESSIONAL 110 Dual Fuel User's Manual And Installation Instructions

Also see for Classic 110 Dual Fuel: User guide & installation & service instructions User guide & installation & service instructions User's guide & installation instructions User guide User's guide & installation instructions

Falcon PROFESSIONAL 110 Dual Fuel User's Manual And Installation Instructions Manual pdf 14 page image

14AustraliaCleaning your cookerEssential informationBefore thorough cleaning isolate the electricitysupply. Remember to switch on the electricitysupply before use.Never use paint solvents, washing soda,caustic cleaners, biological powders,bleach, chlorine based bleach cleaners,coarse abrasives or salt. Don’t mixdifferent cleaning products - they mayreact together with hazardous results.Recommended cleaning materials areshown in the chart below.If you want to move your cooker for cleaning,see the section called ‘Moving your cooker’.All parts of the cooker can be cleaned with hotsoapy water - but take care that no surpluswater seeps into the appliance.‡ Indicates how to clean after the oven liningshave been removed. See below for how toremove the oven linings** Look for aerosols that are approved for use onenamelled surfaces.Hotplate burnersSome models have a separate trim ring, whichfits on the burner head.The burner heads and caps can be removed forcleaning. Make sure they are absolutely drybefore replacing.The LH hotplateA cap, B head, C notch, D base, E electrodeWhen refitting the burner head, make sure thatthe notch lines up with the electrode or hole inthe base. Check that the burner head is leveland that the cap is fitted centrally on the burnerhead.The Wok burnerThe Wok burner is a little more complicated but italso can be taken apart for cleaning.Wok burnerA inner burner cap, B outer burner capC inner burner head D outer burner headE Wok burner base