Famastil F-POWER Instruction Manual
Also see for F-Power: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                        | |
20ENGLISHOPERATING YOUR ANGLE GRINDERSWITCHING ON AND OFFTo turn on, press the tab on thebutton and slide it forward.To turn off, press the rear flap of theswitch. A spring will cause it to turnback to initial position.FITTING THE DISCDisconnect the plug from theelectricity supply. Ensure the guard isfitted.Place the inner flange (PIC 2) on thespindle. Ensure it is located on the twoflats.Place the abrasive disc on the spindleand inner flange (PIC 2). Ensure it iscorrectly located.Fit the threaded outer flange (PIC 2),making sure it is facing in the correctdirection for the type of disc fitted:• For grinding discs, the flange is fittedwith the raised portion facing towardsthe disc. (PIC 3 - A).010304020102PIC 1PIC 2OUTERFLANGEDISCINNERFLANGESPINDLEWARNING! Once turned on, thegrinder will not turn off justreleasing the switch. Stepnumber 2 (above) must befollowed to turn off the machine.TECHNICAL SPECIFICATIONSPower: 750WCapacity: 115mm (4.1/2”)Speed : 11.000RPMMeasures: 27 x 11 x 7cmAproximated weight : 1,8KgCord: 2m |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine