INSTALLATION AND ASSEMBLYCAUTION: Before installing the fan make sure you have turned OFF the electricity supply.SELECTING A LOCATION:1. Choose a location for mounting the fan where the blades will have at least 2.1 metres ofclearance from the floor.2. Make sure that the installation site will not allow the rotating fan blades to come into contactwith any object and that there is a minimum clearance of 150mm (6”) from the blade tip tothe wall or ceiling. Please note that the bigger this clearance is the better the airflow fromyour fan will be.3. DO NOT use outdoors unless installed in an enclosed alfresco area. In this case fan shouldbe installed at least 1.5m away from edge of eave/roof. Installing the fan in a position whereit could be exposed to water or moisture is dangerous.4. If the location you have chosen does not have a suitable support beam capable ofsupporting 45Kg, install a brace 2” x 4” between the ceiling joists as a support medium.5. Secure the hanging bracket to the ceiling joist or suitable structure that is capable ofcarrying a load of at least 45Kg, with the two long fixing screws provided. Ensure that atleast 30mm of the screw is threaded into the support.NB: The fixing screws included are designed for use when ceiling fan is secured ontotimber joists. For all other surfaces, additional and suitable fixing screws for that surfacewill need to be purchased.4ELECTRICAL CONNECTIONS:• Ensure the power is off when installing this fan.• Connect the Live (L), Neutral (N) and Earth ( ) according to the markings on theTerminal Block.For your convenience, and to assist in easy installation & cleaning, your ceiling fan isconnected with Brilliant’s easy connect system. Simply connect the male and femalecouplings, and then ensure excess wiring is retained inside the upper canopy.