Fantech SH704 Installation, Operation And Maintenance Manual

Also see for SE704: Installation, operation and maintenance manual

Contents

Fantech SH704 Installation, Operation And Maintenance Manual Manual pdf 2 page image

2TABLE OF CONTENTSTECHNICAL DATASH704 3VH704 5SE704 7INSTALLATION 9Mounting the Unit 9Location & Ducting 10Examples 12Air Flow Balancing 16MAINTENANCE 17TROUBLESHOOTING 18ELECTRICAL CONNECTIONS 19The BestLimited Warrantyin the Business• The heat recovery aluminum core has alimited lifetime warranty and the enthalpyenergy recovery core has a 5 year limitedwarranty.• The motors found in all Fantech HRV/ERVsrequire no lubrication, and are factorybalanced to prevent vibration and promotesilent operation.• The limited warranty covers normal use.It does not apply to any defects,malfunctions or failures as a result ofimproper installation, abuse, mishandling,misapplication, fortuitous occurrence orany other circumstances outsideFantech’s control.• Inappropriate installation ormaintenance may result in thecancellation of the warranty.• Any unauthorized work will result inthe cancellation of the warranty.• Fantech is not responsible for anyincidental or consequential damagesincurred in the use of the ventilationsystem.• Fantech is not responsible for providingan authorized service centre near thepurchaser or in the general area.• Fantech reserves the right to supplyrefurbished parts as replacements.• Transportation, removal and installationfees are the responsibility of the purchaser.• The purchaser is responsible to adheringto all codes in effect in his area.• The warranty is limited to 5 years onparts and 7 years on the motor from thedate of purchase, including parts replacedduring this time period. If there is noproof of purchase available, the dateassociated with the serial number will beused for the beginning of the warrantyperiod.* This warranty is the exclusive and onlywarranty in effect relative to the ventilationsystem and all other warranties eitherexpressed or implied are invalid.Sizing (Example) for minimum airflow normally required.HRV/ERV units are typically sized to ventilate at 0.35 air changes per hour. To calculate, sim-ply take the square footage of the space and multiply by the height of the ceiling to get cubicvolume. Then, divide by 60 and multiply by 0.35.Example: Total SQFT 1100Height of ceiling x 8Cubic volume 8800/ 60147x 0.35Airflow required (CFM) 51 cfm total* Always consult your local code for sizing requirements in your area.* If additional exhaust capacity is required, installation of a fantech bath kit in main bath areais recommended.***Illustrations &images in thismanual may not beexactly like unitpurchase, theseillustrations &images are forexamples only.***ASHRAE Standard 62.2 - 2004Sizing (Example) for minimum airflow normally required.Ventilation Air Requirements, cfm Ventilation Air requirements, L/s