Remove the dust compartment.(refer to page 9)Clean the filter fins free of dirt with the forked end of cleaning utensil as shown.PrefilterDust CompartmentRibsMain Filter11CLEANING THE FILTERS2 Set the dust compartment to the parallelposition.Open the trapdoor,then push therelease button E and pull out the mainfilter.3 Clean the main filter and prefilter with a soft-bristled brush (not included) andrinse with cold water. Allow both items to dry completely for 24 hours.Caution:Do not use a hard-bristled brush to clean filters.This may result in damage to the filters.Do not attempt to dry with a hair dryer or byplacing in a clothes dryer.Hot air may cause thefilters to warp.Reattaching the filtersInsert the main filter into theprefilter as shown.10The main filter and prefilter will beremoved at the same time.2 Hold onto the main filter and insert intothe dust compartment.Align the ribs of the main filter to matchthe shape of the opening in the dustcompartment and press firmly to insert.Hole3 Close the trapdoor.Cleaning UtensilCaution: Do not push the releasebutton E at the upright position.As this may drop or damage themain filter and prefilter.To maintain optimum suction power, the dust filter fins should be kept clean of dirt.Cleaning UtensilRelease Button E3NOTE: We recommend replacing the main filter every three (3) to six (6) months, dependingon the amount of use