Fantom FM742H Instruction Manual

Contents

Fantom FM742H Instruction Manual Manual pdf 15 page image

Place a new flat belt onto the motor shaft and pulley.12345Bearing HolderGrooveNozzle HeadREPLACEMENT INSTRUCTIONSCaution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect thepower cord from the wall outlet before replacing any of the parts below.REPLACING THE FLAT BELTRemove the bottom plate.(refer to page 14)Lift out the agitator assembly,and then remove the flat belt from the motor shaft andthe agitator pulley.Place the agitator assembly into the grooves in the nozzle head, making sure that the newflat belt slides securely into the guide.Caution:Install the flat belt so that it has notwists in it,and so that all componentsturn smoothly.Reattach the bottom plate(refer to page 14)13Motor ShaftFlat BeltPulleyFlat BeltAgitator AssemblyMotor ShaftFlat Belt