Farallon SkyLINE 11Mb User Manual
Also see for SkyLINE 11Mb: User guide
                                                    | |
Contents
| 
16 Chapter 2WINDOWS INSTALLATIONHave your original Windows system software CD-ROM or diskettes onhand when you begin installation.Note: If you do not have a CD-ROM drive in your computer, you candownload the driver software from the Farallon website atwww.farallon.com. A disk image is also available on the Faral-lon CD-ROM included in your SkyLINE 11Mb Wireless PC Cardpackage. This disk image can be used to create an installerdiskette on a desktop machine with a CD-ROM drive.If you have access points installed on your network you will need thefollowing information to configure your SkyLINE 11Mb Card:n SSID (Service Set Identification): the name of the access pointn Address mode: how wireless packets are being converted toEthernet on your wireless networkn Data rate: the rate data is being transmitted on the networkn Encryption: any passwords or keys used by your access point forWireless Encryption (WEPWINDOWS 95/98 INSTALLATIONINSTALLING SKY LINE SOFTWARE1. Insert the SkyLINE CD-ROM into the CD drive of your computer.2. The software installer should start. If the CD does not autostart,select Run from the Start menu, and type x:setup.exe (where x isthe designation of your CD ROM drive). Click OK.3. Select Next at each screen to install the software, and Yes toaccept the software agreement.4. When prompted, enter the name of your local area network SSID. Thisname must be the same for all computers on the network. The SSIDname is case and space sensitive and must be entered precisely.5. When prompted, select Ad Hoc or Infrastructure network mode.Ad Hoc: Ad Hoc allows several wireless workstations to be linkedon a local area network. In Ad Hoc mode all the operations area.Touch11book Page 16 Monday, April 17, 2000 5:38 PM |
Related manuals for Farallon SkyLINE 11Mb
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine