Farallon SkyLINE 11Mb User Manual
Also see for SkyLINE 11Mb: User guide
                                                    | |
Contents
| 
32 Chapter 3WINDOWS NT DIAGNOSTICSIf you have trouble when using your card with Windows NT, you canuse Windows NT Diagnostics to check the following items.1. Click Start in the Windows taskbar.2. Select Programs > Administrative Tools.3. Click Windows NT Diagnostics.4. Click the Resources tab.5. Click IRQ to display IRQs in use by other devices.6. The default IRQ for the PCMCIA card is 09. If this is in use byanother device, you must select another IRQ for the PCMCIA card.7. Click on the Memory tab to open the Memory box.8. Look for an entry that includes CW10.If it is present, the card is properly installed.If CW10 is not present, continue below.9. Right-click on Network Neighborhood icon on the desktop. Left-click on Properties.10. Click on the Adapters tab and then on the Properties button.11. In the Adapter Setup dialog box, change the Memory Base fromC8000 to DF000. Click OK. Restart if prompted.12. Click on the Protocols tab and verify that the NetBEUI and TCP/IPprotocols are active. If not, click on the Add button to add each ofthem.13. Click on the Identification tab to set up your Workgroup. Give yourcomputer a unique name and a workgroup name. All computersthat are intended to share file or printers must use the sameworkgroup name.14. Click OK to register any changes.15. Click Close in the Network dialog box to complete setup.a.Touch11book Page 32 Monday, April 17, 2000 5:38 PM |
Related manuals for Farallon SkyLINE 11Mb
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine