Farenheit TI-344 Owner's Manual

Contents

18Bluetooth Section(Only for TI-344B/TI-344BTmodel)Warning: Driving and having a Telephone conversation at the same time is dangerous, pleasepark your car before having a telephone conversation. The supplier assumes any and all liabilitywhen this warning is not followed.To enter Bluetooth mode, you can press mode button on remote or on front panel.BT Main MenuBluetooth disconnect mode Bluetooth connect modeA user can make own choice by press / on the panel or / / / on the RC to selectthe icons as below.Select CALLING icon to use phone functions.Select MUSIC icon to start BLUETOOTH music player.Select DAILED icon to display the phone number dialed out.Select RECEIVED icon to display the phone number received.Select MISSED icon to display the phone number missed.Tap PHONEBOOK icon to use phone book functions.Pairing ModeAt the 1st time when using BLUETOOTH, you need to pair the mobile phone first.When a phone have not been paired with the unit, the BT icon and Pairing mark will blinkcontinually on the panel.When the unit have connect with phone, the BT icon will turn on and the Mobile phone name (ifavailable) will be display on the panel.According to mobile pairing device manual, after searching new device (Soundstream), select it,input password "0000" and confirm ok, device paring is finished.The text ‘Enter Number’ will shows on the panel after the pairing is completed. It means device isconnected and ready for BLUETOOTH communication.Auto-connect - DisconnectWhen power on the unit, the last paired phone will be connected to the device via Bluetoothautomatically, after searching about one minute, if the device cannot find the paired phone, it willstop searching. When in standby mode (unconnected), long press Bluetooth button on remotecontrol to active auto-connect function and the device will search the last paired phone.If you want to disconnect the Bluetooth connection, just turn off the Bluetooth on the phone.1.CALLINGpress / on the panel or / / / on the RC to select CALLING icon and press VOLbutton on panel or enter button on the RC to confirm the selection to enter call mode.In Call mode, the unit can be used as your phone. Making and receiving calls are possible withBLUETOOTH. Simply press phone number on the RC and press button to make a call,and press button to hang up.