Farmet DUO Operating Manual
                                                | |
Contents
| 
OPERATING MANUALOILSEED SCREW PRESS FARMET DUOPage 18 of 48Press capacity – the quantity of the pressed material entering the press per unit of time,usually stated in kilograms per hour3.2 OPTIONAL EQUIPMENTElectrical Equipment with Frequency ConvertorThe frequency convertor is installed directly on the motor terminal block. There are controlbuttons on the frequency convertor for switching on and controlling the motor revolutions.More information is available in the NORDAC SK 205E Frequency Convertor OperatingInstructions.Electrical Equipment without Frequency ConvertorThe electromotor starter allows starting and stopping the motor (including emergencystop).Heating SleeveIt warms up the die before the actuation of the press to ensure better start-up.Heating sleeve with temperature regulationIt allows heating and stabilization of the temperature of pressing device to the desiredtemperature.Wooden Pedestal under the PressThe pedestal under the press is made from solid stained timber. It stabilizes the pressduring operation.Table under the PressThe metal pedestal under the press ensures stability during operation.Service ToolsTools required for disassembling and cleaning the press. It contains a hook spanner, a boxspanner and a cleaning preparation.Hopper above the Press with Capacity of 20LA metal hopper above the DUO screw press with the capacity of 20 litres. It is an extensionabove two hoppers that are included in the pressing mechanism. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine