Fasep VIDEOTRONIC V644.G3 User Manual

Contents

Fasep VIDEOTRONIC V644.G3 User Manual Manual pdf 10 page image

Fasep 2000 srl Rev. 1.0Videotronic V644.G3: User’s Manual 27 november 20132-6Fig. 464.2 How to control the calibration of wheel balancer and position weightSwitch on the wheel balancer.Select SET UP > CALIBRATION > SET/OK >CHECK CALIBRATION > SET/OK.Put a wheel on the shaft and press (Fig.46).Put the calibration weight (Fig.47) and press.Close the wheel guard or press .At the end of the spin, 160-0 will show on thevideo (tolerance allowed is ±10).Put the weight at 6h o’clock: the weight indicatorsof internal side must be both green.If not, press <6h>.Put the weight at 6h o’clock and press OK>.Fig. 47Fig. 48Fig. 49