Fasep VIDEOTRONIC V644.G3 User Manual

Contents

Fasep VIDEOTRONIC V644.G3 User Manual Manual pdf 14 page image

Fasep 2000 srl Rev. 1.0Videotronic V644.G3: User’s Manual 27 november 20133-8Fig. 58Fig. 597.3 Input of Rim Dimensions (ALU-SE or LASER version)! CAUTION: Laser installed on wheel balancer is of class 2, so special protection are not required. It is howeverrecommended to avoid the continuos view of the direct beam.MAIN MENU > INPUTPress ALU MODE untill the required position of weight is on the video (fig.57).Insert the distance (IN1).Insert the distance (IN2).Press ALU MODE untill the required position of weight is on the video (fig.58).Insert the distance (IN1).Insert the distance (IN2).7.4 Detecting and correcting umbalance7.4.1 After setting wheel dimensions, press or close the safety cover to spin the wheel and start the measurement run.! CAUTION: wheel start automatically when safety cover is closed.7.4.2 At the end of the spin the wheel will brake automatically and the display will show the weight position and weight requirementto correct the wheel’s umbalance.7.4.3 Apply the weights (fig.59, fig.60). If umbalance shown is 0, press to show residual umbalance.Fig. 60 Fig. 61