Fast & Fluid Management GA450 Manual
                                | |
Contents
| 
Safety GA450 V. 2.272 Safety2.1 Intended useThe machine is designed to mix paint in a can. Any other use of the machine is strictly forbidden.2.2 LiabilityOur machines and accessories are fully compliant with the CE regulations. Any modification can result in notfulfilling the CE safety requirements and is therefore not allowed. Fast & Fluid Management B.V. will not acceptany responsibility in case of modifications to machines and/or accessories.Fast & Fluid Management B.V. is not liable if you do not follow the rules below:- Do not use a damaged machine. When you have doubts, contact your supplier. See § 5.1.- The machine is for indoors use only.- Install and connect the machine according to the instructions in this manual.- Observe all local safety regulations.- Connect the machine to a grounded wall socket.- Keep the machine in good condition. Make sure that defective parts are immediately replaced.- This machine may only be used for commercial settings. The machine is not a household appliance.- Make sure that the machine is installed as prescribed in this manual- Replace parts only with original Fast & Fluid Management B.V. spare parts.All maintenance beyond the scope of this manual must be carried out by a qualified service technician that Fast& Fluid Management B.V. has trained and certified.2.3 User qualification for installationOnly install the machine if you have written permission from the supplier of the machine.2.4 CE certificationThe machine is CE certified. This means that the machine complies with the essential requirements concerningsafety. The directives that have been taken into consideration in the design are available on www.fast-fluid.com.WARNINGRead the manual before you install or use the machine. Failure to do so canresult in personal injury, death or property damage. |
Related manuals for Fast & Fluid Management GA450
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine