Fein BF10-280E Instruction Manual
Also see for BF10-280E: User guideOriginal instructions
                                        |
7enExtension cable.If the use of an extension cableis required, its length and con-ductor cross-section must be adequate for theapplicational case, in order to prevent a volt-age drop in the extension cable, power lossand overheating of the power tool. Other-wise, the extension cable and power tool areliable to electrical danger, and the workingefficiency is impaired.Recommended dimensions of extensioncables at an operating voltage of 120 V – sin-gle-phase a. c., with only one power toolBF10-280E connected:Intended use of the power tool:Hand-guided belt file for dry sanding and pol-ishing of metal materials with belts, inweather-protected environments using theapplication tools and accessories recom-mended by FEIN.Operation of the power tool off powergenerators.This power tool is also suitable for usewith AC generators with sufficient poweroutput that correspond to the Standard ISO8528, design type G2. This Standard is partic-ularly not complied with when the so-calleddistortion factor exceeds 10 %. When indoubt, please refer to the generator instruc-tion/specification guide.Operating the power tool offpower generators whose no-load speed exceeds the voltage value on thetype plate of the power tool is prohibited.WARNINGMin. conductor size(A.W.G.)Min. conductorcross-section, mm 2≤ 100 100–200200–300≤ 30 30– 6060–100Max. cable length, ft Max. cable length, m16 14 12 1.5 2.5 4WARNINGOBJ_DOKU-0000000387-001.fm Page 7 Thursday, July 1, 2010 2:52 PM |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine