Fein GRIT GI1502H5V6 Manual

Also see for GRIT GI 150: Manual Manual Instruction manual Instruction manual Manual

16GI 75en13. Electrical connection.Hazardous VoltageContact may cause electric shock or burn.When wiring this machine make sure it is properly grounded in accordance with NationalElectric code and local codes and ordinances. This work should be done by a qualified electrician.This machine should be grounded while in use to protect the operator from electrical shock. Thetool is equipped with an approved three-conductor cord three-prong grounding type plug to fit theproper grounding type receptacle. The green (or green and yellow) conductor in the cord is thegrounding wire. Never connect the green (or green and yellow) wire to a liive terminal. If your unitis a 220/440 V 3-phase system, the connection to the power source should be done by a four wirecable as shown in figure. When making the connections, check the motor for proper rotation. Tochange the motor rotation, switch two of the live leads. The green wire is always the ground wireand is never to be connected to a live terminal. This work should be done by a qualified electrician.WARNINGGI 75 (US).book Seite 16 Dienstag, 4. November 2008 10:39 10