GASTRON GTD-2000TxW Instruction Manual

Also see for GTD-2000Tx: Instruction manual

GASTRON GTD-2000TxW Instruction Manual Manual pdf 18 page image

GTD-2000TxWInstruction Manual[Figure 11. GTD-2000TxW Mode Configuration]6. Detector Operation Flow6.3. Operation Flow■ After power on, it passes self-diagnostic process then enters Measuring Mode. Here, by operating front keys, youcan go to internal System Mode.■ Timeout for Level1 and Level2 are 10 sec. It is set to 1 h for Level2 Calibration and Test Mode.■ When "RESET: key contacts at Program Mode Screen, it returns to Measuring Mode. When "RESET" key contactsat each Program Setting Screen, it returns to the parent step.■ Operation keys for detector system mode are defined as below.ITEM NAME DESCRIPTIONFUNC Function key Detector Mode Setting Entry Function (Insert Magnetic-bar for 2 sec or longer in measuringmode) Level2 Next stage entering function and setting saving functionRESET Reset key Move to the previous stage from the level entered.↑ Up key Next level mode that is configured in LEVEL1 and Change in Level2 setting Plus↓ Down key Next level mode that is configured in LEVEL1 and Change in Level2 setting Minus