GASTRON GTD-2000TxW Instruction Manual

Also see for GTD-2000Tx: Instruction manual

GASTRON GTD-2000TxW Instruction Manual Manual pdf 9 page image

www.gastron.com08_094. Name and Description of Each PartNo ITEMS SPECIFICATION1 Housing Body Protects PCB Board built in Sensor and Housing from external environmental change and shock.2 Housing Cover It is assembled with Detector Housing Body.Top surface is built with circular glass to enable monitoring of measurement displayed on LCD.3 MAIN PCB Amplifies fine outputs generated from Sensor Element to transmita converted output in 4~20 mA DC standard. It sends data to display part.4 Display PCB Displays data sent from MAIN/ Terminal (Transmitter) PCB on LCD anddisplays power status with a power lamp.5 Power/Signal Terminal CN8 consists DC18V~31 power supply and DC 4~20 mA standard outputconnection terminal (VISO, +24V, mA, GND, ETH).6 Sensor Terminal CN4 is Sensor Connection Terminal.7 Power LED Lamp that turns on upon power supply.8 Function Key It is used to enter function setting mode from gas measuring mode by contacting magnet-bar for2 sec or longer. It is also used to save changed data from function setting mode.[Figure 2. GTD-2000TxW Components]4.1. Components