10-10Printing EnvelopesEnvelopes can be printed on the Elite 21 using either the Multi-PurposeFeeder (Tray 1) of the printer, or with the optional Envelope Feeder.Supported envelope sizes are as follows:•Commercial #10•Monarch •DL •C5To print an envelope from Tray 1 of the printer, follow these steps:1. Load the envelope into the tray:• Open the Multi-Purpose Feeder at the front of the printer.• Adjust the paper size guides to the correct size for the envelopes being used.• Place the envelope(s) into the feeder, with the side to be printed on facing up, the flap onthe right and the short edge facing into the printer.• Up to 10 envelopes can be loaded at one time. Do not overload the feeder.2. Format and send the print job:Macintosh (all versions):• Open the application you wish to print from. Go to the File menu and then down to Page Setup.• Click on the Paper pull-down menu and set the correct paper size for the envelope youare using. Click OK.• Type out the address information into the document. Consult the documentation for the application beingused for specific information on formatting for envelopes.• Go to the File menu and down to Print.• Under “Paper Source” (OS 9.x or earlier) or “Paper Feed” (OS X) set the source to Tray 1.• Set any other print options for the job to the desired settings, and click Print to send the job.Windows (all versions):• Open the application you wish to print from. Go to the File menu and then down to Page Setup.• Click on the Paper pull-down menu and set the correct paper size for the envelope youare using. Under Paper Source, set the source to Tray 1. Click OK.• Type out the address information into the document. Consult the documentation for the application beingused for specific information on formatting for envelopes.• Go to the File menu and down to Print.• Set any other print options for the job to the desired settings, and click Print or OK to send the job.
