GE -3002 Owner's Manual

Also see for JBP64: Installation instructions Owner's manual Installation instructions Owner's manual Installation instructions

Contents

GE -3002 Owner's Manual Manual pdf 13 page image

Safety Instructions Operating InstructionsSafety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support13Using the clock and timer. GEAppliances.comNot all features are on all models.To Set the ClockThe clock must be set to the correct timeof day for the automatic oven timingfunctions to work properly. The time ofday cannot be changed during a timedbaking or self-cleaning cycle.Press the CLOCK pad.Press the HOUR and MIN. pads untilthe time of day shows in the display.Make sure the clock is set to thecorrect time of day.To Set the TimerPress the TIMER ON/OFF pad. Press the HOUR and MIN. pads untilthe amount of time you want showsin the display. The timer will startautomatically within a few secondsof releasing the pad.The timer is a minute timer only.The timer does not control ovenoperations.The maximum setting on the timeris 11 hours and 59 minutes.End of Cycle TonesClear the tones by pressing the pad of thefunction you are using.orTo Reset the TimerIf the display is still showing the timeremaining, you may change it by pressingthe HOUR and MIN. pads until the timeyou want appears in the display.If the remaining time is not in the display,recall the remaining time by pressing theTIMER ON/OFF pad and then pressing theHOUR and MIN. pads until the new timeyou want shows in the display.To Cancel the TimerPress the TIMER ON/OFF pad twice.To Black-Out the ClockIf you have several clocks in your kitchen,you may wish to black-out the time of daydisplay of your range. If so, press theCLOCK pad.Press the CLOCK pad twice to retain the time ofday after a black-out.Although you cannot see it, the clockmaintains the correct time of day. It willreappear for the duration of any functionthat displays a Start Time or Cook Time.Press the CLOCK pad again to bring backthe display.